Info
Owner: ColeJ
Rom: D2WD710A
Tyres: 225/40-18
Car Weight: 1650kg
Driver Weight: 105kg
Total Weight: 1755kg
Mods
None
Fuel Octane: New Zealand 98RON
Weather data:- http://www.wunderground.com/cgi-bin/fin ... +3015&MR=1
Other forum:-
ColeJ - 2005 JDM Subaru Legacy H6 3.0R 6MT - Tuning
-
- Site Admin
- Posts: 1713
- Joined: Sun May 20, 2007 11:08 pm
- Location: Barbados
- Contact:
-
- Site Admin
- Posts: 1713
- Joined: Sun May 20, 2007 11:08 pm
- Location: Barbados
- Contact:
-
- Site Admin
- Posts: 1713
- Joined: Sun May 20, 2007 11:08 pm
- Location: Barbados
- Contact:
v3 Review + 3rd Gear Dyno SAE
XRT Tuning Feedback,
I thought I’d post my feedback and experience with tuning my 3.0R with Edward, firstly I’ll say the car has been transformed from stock. It is so much more responsive and the midrange torque feels a lot stronger! The common throttle lag caused by the cars’ DBW stock calibration has also been eliminated.
I came to XRT based off research and what others in the forum communities are saying, and its true Edward delivers on what has been said. I’m 17 hours ahead of Barbados here, and he seems to always be online to help and he knows what is happening with the car based off my description and looking at the numbers in the logs. He could tell I was having a little trouble with AVCS actuation and the AFR sensors, and sure enough after replacement, improvement in response.
Each version of the map has been an improvement, we are on V3 now, and it is massively different to stock, no more pinging, no more throttle lag and sometimes stalling, and much more torque. It is actually safe on our 98RON fuel here now. Its crazy fun just rowing through the gearbox, and it feels as fast as a wrx, but without all the noise, and with composure and smoothness.
So in summary, if you’re looking to have your 3.0r tuned- which you should be- have a chat with Edward, he is very knowledgeable, and you won’t be disappointed.
Cheers,
Cole