PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

2000-2002 Subaru Outback/Legacy/liberty
2003-2009 Subaru Outback/Legacy/Liberty
2006-2007 Subaru Tribeca
https://en.wikipedia.org/wiki/List_of_S ... _EZ_engine
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by west_minist »

Info
Owner:PhilB
Rom: D0XJ002K
Tyres: 215/45-18
Car Weight: 1480g
Driver Weight: 200kg
Total Weight: 1680kg

Mods
Raptor headers
Cat back exhaust but appears to have std rear mufflers
Flatt racing intake pipe
VaDa

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by VaDa »

Do you have definition in xml file for this ROM ???
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by west_minist »

Are you a tuner? What we use is not supported but Ecuflash or Romraider.
VaDa

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by VaDa »

I'm not tuner. I am the owner of the same machine model. 2006 JDM legacy Spec B 3.0R 6mt with same ROM: D0XJ002K
But I can't open that ROM with romraider.
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by west_minist »

OK. She is pinging too much?
VaDa

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by VaDa »

what ???
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by west_minist »

Don't worry. I was wondering why you would need to see the rom and you maybe a complete novice.
VaDa

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by VaDa »

Yes. I am newbie. but not a completely beginner :)

I just want the most out of my car.
VaDa

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by VaDa »

maybe you know what I can do without see the rom ?


I did something on the car and he did not drive badly. But I want to drive even faster.
Last edited by VaDa on Sun Jun 17, 2018 7:30 am, edited 1 time in total.
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: PhilB - 2005 JDM Subaru Legacy 3.0R 6MT - Tuning

Post by west_minist »

Log her using romraider and review any issues.

We offer logging/Diagnostic services to help.

http://xtremeracingtuning.com/logging-diagnostics/
http://xtremeracingtuning.com/2017/09/2 ... -flashing/

Logging variables:
Accelerator Pedal Angle (%)
A/F Correction #1 (%)
A/F Correction #2 (%)
A/F Learning #1 (%)
A/F Learning #2 (%)
A/F Sensor #1 (AFR)
A/F Sensor #2 (AFR)
Coolant Temperature (C)
Engine Load (2-byte)** (g/rev)
Engine Speed (rpm)
Feedback Knock Correction (degrees)
Fine Learning Knock Correction (degrees)
Gear (Calculated)* (position)
IAM (1-byte)** (multiplier)
Ignition Total Timing (degrees)
Injector Duty Cycle (%)
Intake Air Temperature (C)
Intake VVT Advance Angle Left (degrees)
Intake VVT Advance Angle Right (degrees)
Knock Correction Advance (degrees)
Manifold Absolute Pressure (psi)
Mass Airflow (g/s)
Mass Airflow Sensor Voltage (V)
Oil Temperature (C)
Throttle Opening Angle (%)
Vehicle Speed (kph)
Post Reply

Return to “Subaru H6 3.0”