ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Subaru 2001+
Mitsubishi 2003+

ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Postby west_minist » Fri Jul 16, 2010 6:39 am

Info
Owner: ez30rb
Rom: D2WD603H
Tyres: 225/35-19
Car Weight: 1510kg
Driver Weight: 85kg
Total Weight: 1595kg

Mods
HKS Panel Filter
Hi Tech Quad Exhausts
User avatar
west_minist
Site Admin
 
Posts: 781
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados

Stock Performance

Postby west_minist » Sun Jul 18, 2010 9:39 am

2nd Gear Dyno Stock IAT=25C.png
2nd Gear Dyno Stock IAT=25C.png (16.12 KiB) Viewed 57 times

Still downhill in the end, which would rise power a bit

3rd Gear Dyno Stock IAT=20C.png
3rd Gear Dyno Stock IAT=20C.png (16.7 KiB) Viewed 56 times


Stock performance.png
Stock performance.png (19.61 KiB) Viewed 57 times
User avatar
west_minist
Site Admin
 
Posts: 781
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados

V1 feedback

Postby west_minist » Sun Jul 18, 2010 9:28 pm

http://forum.liberty.asn.au/viewtopic.p ... 82#p132104
EZ30RB wrote:Edward sent me a v1 this morning, and can say that the improvements are fantastic. The car pulls smoother and harder down low between 2-4K, picking up speed much easier than before and the flat feeling you get occasionally is gone. Pedal feel is better and more crisp, and you don't need as much pressure to build up speed. Higher revs also feels more crisp and elastic and the engine sounds great on song. I found myself wanting to go faster and faster ;) This is only v1 as well!


v1 vs stock - 3rd gear Dyno.png
v1 vs stock - 3rd gear Dyno.png (19.91 KiB) Viewed 52 times


v1 3rd Gear Dyno IAT=19C.png
v1 3rd Gear Dyno IAT=19C.png (16.63 KiB) Viewed 52 times


v1 stats.png
v1 stats.png (21.35 KiB) Viewed 52 times
User avatar
west_minist
Site Admin
 
Posts: 781
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados

v3 Stats

Postby west_minist » Mon Jul 19, 2010 9:08 pm

v3 stats.png
v3 stats.png (19.49 KiB) Viewed 46 times
User avatar
west_minist
Site Admin
 
Posts: 781
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados

Re: ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Postby west_minist » Mon Jul 19, 2010 9:12 pm

http://forum.liberty.asn.au/viewtopic.p ... 94#p132288
EZ30RB wrote:v3 is uploaded. The engine note has changed and sounds stronger and more roar up high. Very nice.

In gear acceleration feels stronger and more responsive.

Totally different and completely better drive compared to stock.
User avatar
west_minist
Site Admin
 
Posts: 781
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados

v5 Stats

Postby west_minist » Tue Jul 20, 2010 9:18 pm

v5 2nd Gear Dyno IAT=14C.png
v5 2nd Gear Dyno IAT=14C.png (16.05 KiB) Viewed 43 times
User avatar
west_minist
Site Admin
 
Posts: 781
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados

Re: ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Postby west_minist » Tue Jul 20, 2010 11:07 pm

http://forum.liberty.asn.au/viewtopic.p ... 82#p132470
ez30rb wrote:Tuning is pretty much complete.

With V5, the car is a pleasure to drive. I don't want to stop driving and cannot help push the car hard as the power delivery is so much smoother and stronger.

The final v6 is to be uploaded later today.
User avatar
west_minist
Site Admin
 
Posts: 781
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados

Re: ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Postby west_minist » Sun Aug 08, 2010 8:52 am

http://forum.liberty.asn.au/viewtopic.p ... 82#p134122
ez30rb wrote:After some more fine tuning, we've arrived at v10 which included some ign fixes for when high speed cruising.

Driving impressions - Pedal feel is just right, and power is smooth and consistent. Edward from XRT is a friendly guy, and knows his stuff. If you own an H6, I highly recommend the services by Edward. If you've had the Upper Engine Cleaner done before, having it tuned feels like that and much more.

Below is a V9 3rd Gear Pull done on a very slightly inclined road.

Image
User avatar
west_minist
Site Admin
 
Posts: 781
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados


Return to ECU Reflash

Who is online

Users browsing this forum: No registered users and 1 guest