ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

2000-2002 Subaru Outback/Legacy/liberty
2003-2009 Subaru Outback/Legacy/Liberty
2006-2007 Subaru Tribeca
https://en.wikipedia.org/wiki/List_of_S ... _EZ_engine
Post Reply
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by west_minist »

Info
Owner: ez30rb
Rom: D2WD603H
Tyres: 225/35-19
Car Weight: 1510kg
Driver Weight: 85kg
Total Weight: 1595kg

Mods
HKS Panel Filter
Hi Tech Quad Exhausts
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Stock Performance

Post by west_minist »

2nd Gear Dyno Stock IAT=25C.png
2nd Gear Dyno Stock IAT=25C.png (16.12 KiB) Viewed 9253 times
Still downhill in the end, which would rise power a bit
3rd Gear Dyno Stock IAT=20C.png
3rd Gear Dyno Stock IAT=20C.png (16.7 KiB) Viewed 9252 times
Stock performance.png
Stock performance.png (19.61 KiB) Viewed 9253 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

V1 feedback

Post by west_minist »

http://forum.liberty.asn.au/viewtopic.p ... 82#p132104
EZ30RB wrote:Edward sent me a v1 this morning, and can say that the improvements are fantastic. The car pulls smoother and harder down low between 2-4K, picking up speed much easier than before and the flat feeling you get occasionally is gone. Pedal feel is better and more crisp, and you don't need as much pressure to build up speed. Higher revs also feels more crisp and elastic and the engine sounds great on song. I found myself wanting to go faster and faster ;) This is only v1 as well!
v1 vs stock - 3rd gear Dyno.png
v1 vs stock - 3rd gear Dyno.png (19.91 KiB) Viewed 9248 times
v1 3rd Gear Dyno IAT=19C.png
v1 3rd Gear Dyno IAT=19C.png (16.63 KiB) Viewed 9248 times
v1 stats.png
v1 stats.png (21.35 KiB) Viewed 9248 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

v3 Stats

Post by west_minist »

v3 stats.png
v3 stats.png (19.49 KiB) Viewed 9242 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by west_minist »

http://forum.liberty.asn.au/viewtopic.p ... 94#p132288
EZ30RB wrote:v3 is uploaded. The engine note has changed and sounds stronger and more roar up high. Very nice.

In gear acceleration feels stronger and more responsive.

Totally different and completely better drive compared to stock.
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

v5 Stats

Post by west_minist »

v5 2nd Gear Dyno IAT=14C.png
v5 2nd Gear Dyno IAT=14C.png (16.05 KiB) Viewed 9239 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by west_minist »

http://forum.liberty.asn.au/viewtopic.p ... 82#p132470
ez30rb wrote:Tuning is pretty much complete.

With V5, the car is a pleasure to drive. I don't want to stop driving and cannot help push the car hard as the power delivery is so much smoother and stronger.

The final v6 is to be uploaded later today.
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: ez30rb - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by west_minist »

http://forum.liberty.asn.au/viewtopic.p ... 82#p134122
ez30rb wrote:After some more fine tuning, we've arrived at v10 which included some ign fixes for when high speed cruising.

Driving impressions - Pedal feel is just right, and power is smooth and consistent. Edward from XRT is a friendly guy, and knows his stuff. If you own an H6, I highly recommend the services by Edward. If you've had the Upper Engine Cleaner done before, having it tuned feels like that and much more.

Below is a V9 3rd Gear Pull done on a very slightly inclined road.

Image
Post Reply

Return to “Subaru H6 3.0”