2005 ADM Subaru Liberty 3.0R 5EAT - Tuning

[west_minist]

Info
Owner: RAN94A
Rom: D2ZY110H
Tyres: 215/45-17
Car Weight: 1490kg
Driver Weight: 75kg
Total Weight: 1565kg

Max Power: 186 kW , 250 HP SAE @ 6,600 rpm
Max Torque: 219 ft lb , 297 Nm @ 4,200 rpm

Dyno'es performed against vehicle speed

Mods
None

[west_minist]

'es IAT=56-38C.png (16.41 KiB) Viewed 9865 times

StocK 2nd Dyno'es IAT=56-38C

'es IAT=50-29C.png (17.04 KiB) Viewed 9865 times

Stock 3rd Dyno'es IAT=50-29C

[BlackFlatSix05]

WTF is going on in those graphs ?

[west_minist]

WTF is going on in those graphs ?

If you think about it, the 3rd gear graphs will look like that. Eco to normal mode, including closed-loop to open-loop and maybe and I feel its more the torque convertor locking up after 4000rpm

[west_minist]

from RAN94A
to SOCOB SOCOB <socob.bb@gmail.com>
date Fri, Feb 19, 2010 at 7:36 AM
subject Re: v0 Logs
mailed-by gmail.com
signed-by gmail.com

Hi Edward,

uploaded the new rom and I can definitely notice a difference!

My feedback is power now comes on at 2,500 rather than 3,000. Are we able to get abit more power at maybe 2,000 (not sure if this is possible let me know)

[west_minist]

http://forum.liberty.asn.au/viewtopic.p ... 28#p114585

Hi Guys,

Just leaving a log of my experiences with Edward and his tuning so far as i have received abit of interest via PM.

Let me start off by saying Edward personally is an absolute top bloke!! Very patient and immensely knowledgeable in his field.

I have 0 Tuning experience and was abit worried this process would be too difficult for a novice.. however with some encouragement from flatblacksix i decided to go for it.
Edward has helped me through every step explaining when needed and even to the point of remote access to set up some of the software and walking me through the steps in the car.

As for the tune im currently on the first version he has given me (so it's a mild tune and even at this stage the difference is noticeable whilst being safe) I am definitely looking forward to the final product.

More updates to come...

[west_minist]

v1 2nd Gear Dyno IAT=42-38C.png (14.44 KiB) Viewed 9838 times

v1 3rd Gear Dyno IAT=39-31C.png (13.67 KiB) Viewed 9838 times