2005 ADM Subaru Liberty 3.0R Spec B 6MT - Tuning Process

[west_minist]

Info
Owner: BlackFlatSix05
Rom: D2WD603H
Tyres: 215/45-18
Car Weight: 1470kg
Driver Weight: 98kg
Total Weight: 1568kg

The fuel injected flat 6-cylinder engine has a 3.0-litre (3000cc) capacity and both cylinder heads and the engine block are made from aluminium alloys. Chain-driven dual overhead camshafts per cylinder bank actuate 4-valves per cylinder, complete with and variable valve timing (VVT) and lift. A compression ratio of 10.7:1 allows 95 octane petrol to be used, which fills a 64 litre fuel tank.

Max Power: 180kW @ 6600rpm
Max Torque: 297Nm @ 4200rpm
Wheel power is normal 50units less in Subaru drivetrains. That implies 130kw and 247Nm @ the wheels

Gear Ratio's
3.635
2.375
1.761
1.346
0.971
0.755
Final: 3.9

Mods
HKS Panel Filter
Hitech quad tip Exhaust Mufflers

[west_minist]

Stock Landbase Dyno

My05 ADM 3R - Stock.png (97.55 KiB) Viewed 16272 times

Software Dyno

Stock 3rd Gear Dyno #1 20090617.jpg (282.27 KiB) Viewed 16323 times

Based on rpm

Stock 3rd Gear Dyno-s #1 20090617.jpg (278.79 KiB) Viewed 16323 times

Based on speed

[BlackFlatSix05]

That would be my car.

[BlackFlatSix05]

Only picture I have of the air filter is this one.

[west_minist]

Stock driving performance

[west_minist]

Stock Dyno First Gear

[west_minist]

Second Gear Dyno

[west_minist]

Stock 3rd gear Dynos Combine

Stock 3rd Gear Dyno-r combine.jpg (264.28 KiB) Viewed 16299 times

Stock Gear Dyno-r - 3rd vs 2nd: Higher values represent 3rd Gear

Stock Gear Dyno-r - 3rd vs 2nd.jpg (257.36 KiB) Viewed 16299 times

[west_minist]

Stock 4th Gear Dyno Stats

Stock 4th Gear Dyno-r - EL vs FLKC vs FKC.jpg (324.14 KiB) Viewed 16299 times

[west_minist]

I would advice you to shift around 6500+rpm in the future