CotyJ - 2008 USDM Subaru Liberty 2.5i 5MT - Turbo Tuning

2008+ Subaru Legacy/Outback
Post Reply
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

CotyJ - 2008 USDM Subaru Liberty 2.5i 5MT - Turbo Tuning

Post by west_minist »

Info
Owner: CotyJ
Rom: EZ1GB00G
Tyres:
Car Weight: 1395kg
Driver Weight: 86kg
Total Weight: 1481kg

Mods
Tomei uel header,
td06-20g
Perrin front mount
Turbo xs rfl bov
Tial 38mm ewg
3" MAF Tube
Omni 4bar
dw 65c Pump
Tech works engineering cams, springs and retainers
ID725 Injectors
3in Charles's down pipe and 3 inch exhaust all the way back.
Built EJ255(stock wrx compression) bottom end
Gates timing belt
Light crank pulley
ACT clutch, wrx flywheel,
2011 WRX transmission rear different and axles,
n/a intake manifold,
voodoo manual boost controller
Sti oil pan and baffle
Killer B oil pickup,
WRX radiator
WRX water pump,
WRX oil cooler,
WRX water crossover pipe.

Gas: 87 & 91 RON

Weather
Image
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Subaru Stage 2 SOHC Cams

Post by west_minist »

TWE_Stg_2_Cams.png
TWE_Stg_2_Cams.png (4.04 KiB) Viewed 10911 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: CotyJ - 2008 USDM Subaru Liberty 2.5i 5MT - Turbo Tuning

Post by west_minist »

Tuning has started.
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Sample vid

Post by west_minist »

IMG_0361.mp4
(933.95 KiB) Downloaded 3585 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: CotyJ - 2008 USDM Subaru Liberty 2.5i 5MT - Turbo Tuning

Post by west_minist »

Project move on to an NA built due to wiring issues started after the turbo turbine area melt wires.
Post Reply

Return to “Subaru H4 2.5i”