RandyM - 2017 USDM XV CVT Turbocharged (XRT-XVT01)

2010+ Subaru CVT 2.5i
Subaru Impreza FB/FA
Subaru Crosstrek
Subaru XV
Rmmotorworks

Re: RandyM - 2017 USDM XVT CVT Turbocharged

Post by Rmmotorworks »

turbo drain sump vent can be teed into Mishimoto crank case vent hose (supplied with intercooler kit). right behind the AC compressor. you can see it in one of the previous photos.

I bought a OEM 15+WRX air box and pipe but the mass airflow sensor did not fit in the WRX box, so I flipped the XV air box up side down and attached it to the WRX turbo inlet pipe, it works but I plan on fabing a custom intake in the future. They sell aluminum mass air flow bungs on ebay, XV is same as STI just not WRX
IMG_0134.jpg
IMG_0134.jpg (92.54 KiB) Viewed 12479 times
Rmmotorworks

Re: RandyM - 2017 USDM XVT CVT Turbocharged

Post by Rmmotorworks »

IMG_0138.jpg
IMG_0138.jpg (81.84 KiB) Viewed 12479 times
Rmmotorworks

Re: RandyM - 2017 USDM XVT CVT Turbocharged

Post by Rmmotorworks »

I used a GFB recirculating valve for a 15+ WRX and it installed as it would on the WRX. I ran the vacuum hose to the plugged port on the intake manifold
IMG_0140.jpg
IMG_0140.jpg (80.09 KiB) Viewed 12479 times
Rmmotorworks

Re: RandyM - 2017 USDM XVT CVT Turbocharged

Post by Rmmotorworks »

a little bit of trimming had to be done to the bumper cowl and behind the fog light covers to fit front bumper cover back on
IMG_0126.jpg
IMG_0126.jpg (67.31 KiB) Viewed 12479 times
Rmmotorworks

Re: RandyM - 2017 USDM XVT CVT Turbocharged

Post by Rmmotorworks »

Sooooo.

the parts list is as follows
used exhaust manifold 180
used turbo 200
Mishimoto FMIC 1050
GFB blow off 180
OEM intake tube 85
440 cc injectors 100
PRL turbo flange 30
oil cap 13
electric oil pump 245 (dont go cheap)
heat wrap 20
exhaust parts 350
02 extender harness 18 x3
WRX PCV valve 19
WRX spark plugs 37
silicon hose for charge 20
transcooler 35
Tactrix cable 170
Innovative PSB-1 265 (SCG-1 is recommended - XRT)
Omni 3 bar map (BRZ) 93
Turbosmart WG 90
misc hosses and fittings 120
fuel pump 160

grand total 3521 + alot of beer

You will also need XRT tuning, but that price is for ed to discuss

all parts were purchased from ebay xept the waste gate, I got a deal on it
Rmmotorworks

Re: RandyM - 2017 USDM XVT CVT Turbocharged

Post by Rmmotorworks »

Now the car is running great. I have made some decent pulls to collect data for ED. He is doing an outstanding job!!! This is the first time anyone has tuned a 15+ NA for turbo and there are a lot of hurdles to overcome. ED is knocking it out of the park. Every time he sends me a ROM it gets better and better. His CVT tune is awesome, makes it feel like a sports car not a grocery getter.

thank you for looking and keep an eye out for updates
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: RandyM - 2017 USDM XVT CVT Turbocharged (WRXV)

Post by west_minist »

v3a Boost.png
v3a Boost.png (24.87 KiB) Viewed 12444 times
v3a 3rd Gear Dyno SAE.png
v3a 3rd Gear Dyno SAE.png (32.64 KiB) Viewed 12444 times
Rmmotorworks

Re: RandyM - 2017 USDM XVT CVT Turbocharged (WRXV)

Post by Rmmotorworks »

Going to put more boost in it today :D We will see what it does
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: RandyM - 2017 USDM XVT CVT Turbocharged (WRXV)

Post by west_minist »

v7_2a 2nd Gear Dyno SAE.png
v7_2a 2nd Gear Dyno SAE.png (76.63 KiB) Viewed 12282 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Video

Post by west_minist »

Post Reply

Return to “Subaru FB20/FB25 Tuning (Impreza / Legacy / XV Crosstrek)”