Hyper GC8 JDM Spec C RA V9 - Russia Tuned

2001+ Subaru STI
Post Reply
west_minist
Site Admin
Posts: 1738
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Hyper GC8 JDM Spec C RA V9 - Russia Tuned

Post by west_minist » Sun Mar 09, 2008 3:22 pm

3" catless turboback
k&n filter
Aquamist 2D water injection system (100% water injection only)
Prodrive 3-port solenoid (will install)
My VF36 has been ported and polished
IC spray has the auto function, all working properly
Walbro 255Lb/Hr

JDM Impreza WRX STi Spec C MY05
TY856WB6JA
3.636 2.375 1.761 1.346 1.062 0.842 3.545 1.000
3.900
DCCD (35:65)
Helical LSD

west_minist
Site Admin
Posts: 1738
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: Hyper GC8 JDM Spec C RA V9 - Russia Tuned

Post by west_minist » Sun Mar 09, 2008 3:27 pm

Below is the power to the wheel in the light GC8 body.
Attachments
stg2-4 4th gear Dyno #2.png
Stg2-4 4th Gear Dyno #2 @ IAT=23-17C
stg2-4 4th gear Dyno #2.png (11.58 KiB) Viewed 3300 times
stg2-4 4th gear Dyno.png
Stg2-4 4th Gear Dyno #1 @ IAT=29-19C
stg2-4 4th gear Dyno.png (12.2 KiB) Viewed 3300 times

west_minist
Site Admin
Posts: 1738
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: Hyper GC8 JDM Spec C RA V9 - Russia Tuned

Post by west_minist » Sun Mar 09, 2008 3:30 pm

At present, the Water injection is faulty and sent for repairs. Noting that, the follow dyno is on the same car, but without water intection. All on the stock ECU, 21psi Wastegate and detuned to run at 22psi.
Attachments
s2-23+.png
S2-23 Dyno
s2-23+.png (11.17 KiB) Viewed 3298 times

Post Reply